| Heavy-Duty 12" (305mm) Double-Bevel Compound Miter Saw - Dewalt DW716 |
The DeWalt DW716 is powered by a 15 Amp motor and comes equipped with a 12" carbide blade
spinning at 3600 RPM. The DW716 features extra tall fences and double bevel feature delivering
unmatched performance. The DeWalt DW716 incorporates an adjustable stainless steel miter detent
plate with 11 positive stops for the most common miter cuts. The cam lock miter handle eliminates the
need to twist the miter handle to lock in on the miter angle and delivers a quick and solid miter lock.
The saw features a miter detent override which allows the user to override the miter stops and adjust
to the miter setting desired without the saw slipping into the miter detents while the new precise
miter system delivers more repeatable and accurate miter angles. The innovative machined base
fence design of the DW716 delivers long term fence straightness by providing additional support to
the fence. The DeWalt DW716 delivers the capacity to cut up to 6-1/2" base molding against the fence
when mitered to the left or right and delivers up to a 2" x 10" crosscut with the innovative back fence
design
Amazon.com
This comes pretty darned close to being the ideal jobsite saw. Heading the list of features we love is
the great miter detent override, allowing you to compensate for a world that just isn’t square all the
time. Normally, you’d have a fight on your hands with regular detents because of that annoying
tendency saws have to snap into the detent when you get too close. But built into the cam lock miter
handle is a detent override, and you can cut as close to a detent as you need to without slipping in. It
miters from 0 to 50 degrees both right and left, and of course, there are the 11 positive stops you
expect, and all dead-on accurate. The cam lever is a great improvement over the turnscrew knob on
the miter arm, too.
The tall sliding fence has a machined support that promises nothing but the ultimate accuracy. We like
the extra height because it supports crown molding beautifully, even up to 6-5/8 inches nested and
base molding up to 6-1/2 inches vertically. Need a bevel cut? The fence slides neatly out of the way
for bevels, anywhere from 0 to 48 degrees both left and right. (If you’re in the market for this much
power but just a single bevel, check out the DeWalt 715 saw. If you want all this, a bag of chips and a
slider, step up to the DW718.) There are absolutely no complaints from this motor no matter what you’
re cross-cutting, as it’s drawing a beefy 15 amps and has a max rpm of 3,600, slicing through 2-by oak
like it’s paper. What we found impressive is the saw’s ability to crosscut a 2-by-10 just by adding an
auxiliary base to bring the stock up to level with the back fence.
If portability is a factor, there are few saws that rival this one, we think: It’s just 44 pounds despite its
brawny power, and a smart designer incorporated easy-on-the-body handles into the base that offer a
nice, wide, secure grip. Though it’s well-enough suited to the home workshop, this saw is at home at
the jobsite.--Kris Jensen-Van Heste
Product Description
Powerful motor with innovative gearbox and belt-drive design deliver increased vertical cutting
capacity. The double bevel design allows saw to bevel 0deg to 48deg with positive stops at 0deg , 33.9
deg , 45deg and 48deg both left and right. The exclusive back fence design delivers ability to cut 2in.
x 10in. dimensional lumber at 90deg and 2in. x 8in. at 45deg . Precise miter system and machined base
fence support deliver increased cutting accuracy. Blade Diameter (in.): 12, Amps: 15, Bevel: Double,
Speed - No Load (RPM): 3,600, Total Positive Miter Stops: 11, Max. Degree Miter Cuts - Left: 50, Max.
Degree Miter Cuts - Right: 50, Total Positive Bevel Stops: 4, Max. Degree Bevel Cuts - Left: 48, Max.
Degree Bevel Cuts - Right: 48, Fence: Sliding, Laser Guide: No, Blade Included: Yes, Wrench Included:
Yes, Dust Bag Included: Yes
FEATURES Dewalt 12" Compund Miter Saw DW716
15.0 Amp, 3,600 rpm motor delivers extended power and durability
Adjustable stainless steel miter detent plate with 11 positive stops Improves productivity and ensures
cutting accuracy
Precise Miter System and Machined Base Fence Support optimizes cutting accuracy
Tall sliding fences support crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically
against the fence while easily sliding out of the way for bevel cuts
Innovative gearbox and belt-drive design increases vertical cutting capacity
Double bevel design allows saw to bevel left and right 0° - 48° with positive stops at 0°, 33.9°, 45° and
48° both left and right allowing user to flip the saw not the material
Exclusive Back Fence Design Cuts 2 x 10 dimensional lumber at 90° and 2 x 8 at 45°
0-50° left and right miter capacity for greater versatility
Lightweight (44 lbs.), head lock-down pin, and built-in carrying handle for increased portability
Designed for use with the DW7187 DEWALT adjustable miter saw laser system delivers visibility of the
cutting path
Cam lock miter handle with detent override deliver quick and accurate miter angles.
SPECIFICATIONS Dewalt 12" Compund Miter Saw DW716
Amps 15.0 Amps
No Load Speed 3,600 rpm
Blade Diameter 12 "
Arbor Size 5/8" or 1 "
Vertical Capacity: Baseboard Against Fence 6-1/2 "
Vertical Capacity: Crown Molding Vertically Nested 6-5/8 "
Horizontal Capacity: Baseboard Lying Flat 8" (10" with back fence) "
Horizontal Capacity: Crown Molding Lying Flat 6-1/2 "
45° Bevel Cut Capacity (dimensional lumber) 2x8 (2x10 with back fence) left & right
90° Cross-Cut Capacity (dimensional lumber) 2x8 (2x10 with back fence) "
90° Cross-Cut Capacity (Max Width) 2x8 (2x10 with back fence)
45° Miter Cut Capacity (Max Height) 4x6 dimensional lumber
45° Miter Cut Capacity (Max Width) 2x6 (2x8 with back fence) dimensional lumber
Tool Weight 44 lbs
Shipping Weight 49 lbs
INCLUDES Dewalt 12" Compund Miter Saw DW716
carbide blade
dust bag
blade wrench
spinning at 3600 RPM. The DW716 features extra tall fences and double bevel feature delivering
unmatched performance. The DeWalt DW716 incorporates an adjustable stainless steel miter detent
plate with 11 positive stops for the most common miter cuts. The cam lock miter handle eliminates the
need to twist the miter handle to lock in on the miter angle and delivers a quick and solid miter lock.
The saw features a miter detent override which allows the user to override the miter stops and adjust
to the miter setting desired without the saw slipping into the miter detents while the new precise
miter system delivers more repeatable and accurate miter angles. The innovative machined base
fence design of the DW716 delivers long term fence straightness by providing additional support to
the fence. The DeWalt DW716 delivers the capacity to cut up to 6-1/2" base molding against the fence
when mitered to the left or right and delivers up to a 2" x 10" crosscut with the innovative back fence
design
Amazon.com
This comes pretty darned close to being the ideal jobsite saw. Heading the list of features we love is
the great miter detent override, allowing you to compensate for a world that just isn’t square all the
time. Normally, you’d have a fight on your hands with regular detents because of that annoying
tendency saws have to snap into the detent when you get too close. But built into the cam lock miter
handle is a detent override, and you can cut as close to a detent as you need to without slipping in. It
miters from 0 to 50 degrees both right and left, and of course, there are the 11 positive stops you
expect, and all dead-on accurate. The cam lever is a great improvement over the turnscrew knob on
the miter arm, too.
The tall sliding fence has a machined support that promises nothing but the ultimate accuracy. We like
the extra height because it supports crown molding beautifully, even up to 6-5/8 inches nested and
base molding up to 6-1/2 inches vertically. Need a bevel cut? The fence slides neatly out of the way
for bevels, anywhere from 0 to 48 degrees both left and right. (If you’re in the market for this much
power but just a single bevel, check out the DeWalt 715 saw. If you want all this, a bag of chips and a
slider, step up to the DW718.) There are absolutely no complaints from this motor no matter what you’
re cross-cutting, as it’s drawing a beefy 15 amps and has a max rpm of 3,600, slicing through 2-by oak
like it’s paper. What we found impressive is the saw’s ability to crosscut a 2-by-10 just by adding an
auxiliary base to bring the stock up to level with the back fence.
If portability is a factor, there are few saws that rival this one, we think: It’s just 44 pounds despite its
brawny power, and a smart designer incorporated easy-on-the-body handles into the base that offer a
nice, wide, secure grip. Though it’s well-enough suited to the home workshop, this saw is at home at
the jobsite.--Kris Jensen-Van Heste
Product Description
Powerful motor with innovative gearbox and belt-drive design deliver increased vertical cutting
capacity. The double bevel design allows saw to bevel 0deg to 48deg with positive stops at 0deg , 33.9
deg , 45deg and 48deg both left and right. The exclusive back fence design delivers ability to cut 2in.
x 10in. dimensional lumber at 90deg and 2in. x 8in. at 45deg . Precise miter system and machined base
fence support deliver increased cutting accuracy. Blade Diameter (in.): 12, Amps: 15, Bevel: Double,
Speed - No Load (RPM): 3,600, Total Positive Miter Stops: 11, Max. Degree Miter Cuts - Left: 50, Max.
Degree Miter Cuts - Right: 50, Total Positive Bevel Stops: 4, Max. Degree Bevel Cuts - Left: 48, Max.
Degree Bevel Cuts - Right: 48, Fence: Sliding, Laser Guide: No, Blade Included: Yes, Wrench Included:
Yes, Dust Bag Included: Yes
FEATURES Dewalt 12" Compund Miter Saw DW716
15.0 Amp, 3,600 rpm motor delivers extended power and durability
Adjustable stainless steel miter detent plate with 11 positive stops Improves productivity and ensures
cutting accuracy
Precise Miter System and Machined Base Fence Support optimizes cutting accuracy
Tall sliding fences support crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically
against the fence while easily sliding out of the way for bevel cuts
Innovative gearbox and belt-drive design increases vertical cutting capacity
Double bevel design allows saw to bevel left and right 0° - 48° with positive stops at 0°, 33.9°, 45° and
48° both left and right allowing user to flip the saw not the material
Exclusive Back Fence Design Cuts 2 x 10 dimensional lumber at 90° and 2 x 8 at 45°
0-50° left and right miter capacity for greater versatility
Lightweight (44 lbs.), head lock-down pin, and built-in carrying handle for increased portability
Designed for use with the DW7187 DEWALT adjustable miter saw laser system delivers visibility of the
cutting path
Cam lock miter handle with detent override deliver quick and accurate miter angles.
SPECIFICATIONS Dewalt 12" Compund Miter Saw DW716
Amps 15.0 Amps
No Load Speed 3,600 rpm
Blade Diameter 12 "
Arbor Size 5/8" or 1 "
Vertical Capacity: Baseboard Against Fence 6-1/2 "
Vertical Capacity: Crown Molding Vertically Nested 6-5/8 "
Horizontal Capacity: Baseboard Lying Flat 8" (10" with back fence) "
Horizontal Capacity: Crown Molding Lying Flat 6-1/2 "
45° Bevel Cut Capacity (dimensional lumber) 2x8 (2x10 with back fence) left & right
90° Cross-Cut Capacity (dimensional lumber) 2x8 (2x10 with back fence) "
90° Cross-Cut Capacity (Max Width) 2x8 (2x10 with back fence)
45° Miter Cut Capacity (Max Height) 4x6 dimensional lumber
45° Miter Cut Capacity (Max Width) 2x6 (2x8 with back fence) dimensional lumber
Tool Weight 44 lbs
Shipping Weight 49 lbs
INCLUDES Dewalt 12" Compund Miter Saw DW716
carbide blade
dust bag
blade wrench
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Power Tools Online | Dewalt Tools | Makita Tools | Milwaukee Tools | Bosch Tools | Delta Porter Cable | Hitachi Tools |
| Purchase Dewalt Tools from one of these Dewalt Authorized Online Retailers Click on Retailer for More Savings Information |
| ||||||||||||||||||||
