| Heavy-Duty 12" (305mm) Single-Bevel Compound Miter Saw - Dewalt DW715 |
The DeWalt DW715 is powered by a 15 Amp motor and comes equipped with a 12" carbide blade
which spins at 4000 RPM. The DW715 incorporates an adjustable stainless steel miter detent plate
with 11 positive stops for the most common miter cuts. The saw features a miter detent override
which allows the user to override the miter stops and adjust to the miter setting desired without the
saw slipping into the miter detents while the new precise miter system delivers more repeatable
and accurate miter angles. The cam lock miter handle eliminates the need to twist the miter handle
to lock in on the miter angle and delivers a quick and solid miter lock
The DW715 is powered by a 15-amp motor and comes equipped with a 12-inch carbide blade that
spins at 3,600 rpm. Accuracy is a critical component for a solid miter saw, and the DW715 delivers.
The DW715 incorporates an adjustable stainless steel miter detent plate with 11 positive stops for
the most common miter cuts. The saw features a miter detent override that allows the user to
override the miter stops and adjust to the miter setting desired without the saw slipping into the
miter detents while the new precise miter system delivers more repeatable and accurate miter
angles. The cam lock miter handle eliminates the need to twist the miter handle to lock in on the
miter angle and delivers a quick and solid miter lock. The innovative machined base fence design
delivers long-term fence straightness by providing additional support to the fence. The DW715
delivers the capacity to cut up to 6-1/2-inch base molding against the fence when mitered to the left
and crosscut capacity up to 2 x 8 dimensional lumber. The DW715 is designed to accept the DW7187
DEWALT Adjustable Miter Saw Laser System (SOLD SEPERATELY, NOT INCLUDED) which delivers
visibility to the cut path. The saw can be beveled to the left 0 to 48 degrees and to the right 0 to 3
degrees with positive stops at 0, 45 and 33.9 degrees for cutting crown molding lying flat. Weighing
in at less than 42 pounds and equipped with comfortable side handles in the base, the DW715 is
designed to be extremely portable. The DW715 includes an extension kit, carbide blade, blade
wrench and dust bag.
Amazon.com
There are plenty of chop saws on the market, but there are a few features that set the DeWalt
DW715 apart from the mitering crowd. First among them, we think, is the great detent override,
because every corner in your workday is not a perfect 90 degrees. With most saws, it’s impossible
to set a miter at 44.5 degrees, because you’ll slide right into the otherwise handy detent. But on this
DeWalt, a simple override lets you lock into the exact – and we mean exact – angle you need to get
the tightest fit. There are 11 miter detent stops, and arriving at them takes just a squeeze on the
cam lever, which we like a whole lot more than the turnscrew knobs on other saws.
Running a close second is the machined base support for the tall sliding fence, which DeWalt
promises will never give you anything but the ultimate accuracy. We like the extra height because it
supports crown molding beautifully, even up to 5-1/4" nested and base molding up to 6-1/2"
vertically. Need a bevel cut? The fence slides neatly out of the way for bevels, anywhere from 0 to
48 degrees on the left and 0 to 3 degrees on the right. (Of course, this is the single-bevel version;
if it’s a double bevel saw you’re after, check out the DW716 and the amazing DW718.) You won’t
hear any complaining from this motor no matter what you’re cutting, as it’s drawing a beefy 15 amps
and an rpm of 3,600, slicing through 2-by oak like it’s paper.
If portability is a factor, there are few saws that rival this one, we think: It’s just 42 pounds despite
its brawny power, and a smart designer incorporated easy-on-the-body handles into the base.
Though it’s well-enough suited to the home workshop, this saw is at home at the jobsite. --Kris
Jensen-Van Heste
FEATURES Dewalt Compound Miter Saw DW715
15 Amp motor, 4,000 rpm delivers extended power and durability
Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and
ensures cutting
Exclusive Precise Miter System and Machined Base Fence Support deliver optimizes cutting
accuracy
Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2"
vertically against the fence while easily sliding out of the way for bevel cuts
Bevels 0°-48° to the left and 0°-3° to the right for increased capacity
0°-50° left and right miter capacity for greater versatility
Lightweight (42 lbs.) with built-in carry handle for easy portability
Cam lock miter handle with miter detent override deliver quick and accurate miter angles
4 Hardened Steel Bevel Stops at 0°, 33.9°, 45° and 48° delivers versatility at most common bevel
angles
Designed for use with the DW7187 DEWALT adjustable miter saw laser system delivers visibility to
the cutting path
INCLUDES Dewalt Compound Miter Saw DW715
carbide blade
extension kit
dust bag
blade wrench
SPECIFICATIONS Dewalt Compound Miter Saw DW715
Amps 15.0 Amps
No Load Speed 4,000 rpm
Blade Diameter 12 "
Arbor Size 5/8" or 1 "
Vertical Capacity: Baseboard Against Fence 6-1/2 "
Vertical Capacity: Crown Molding Vertically Nested 5-1/4 "
Horizontal Capacity: Baseboard Lying Flat 8 "
Horizontal Capacity: Crown Molding Lying Flat 6-1/2 "
45° Bevel Cut Capacity (dimensional lumber) 2x8
90° Cross-Cut Capacity (dimensional lumber) 4x6 "
90° Cross-Cut Capacity (Max Width) 2" x 8"
45° Miter Cut Capacity (Max Height) 4x4 dimensional lumber
45° Miter Cut Capacity (Max Width) 2x6 dimensional lumber
Tool Weight 42 lbs
Shipping Weight 49 lbs
which spins at 4000 RPM. The DW715 incorporates an adjustable stainless steel miter detent plate
with 11 positive stops for the most common miter cuts. The saw features a miter detent override
which allows the user to override the miter stops and adjust to the miter setting desired without the
saw slipping into the miter detents while the new precise miter system delivers more repeatable
and accurate miter angles. The cam lock miter handle eliminates the need to twist the miter handle
to lock in on the miter angle and delivers a quick and solid miter lock
The DW715 is powered by a 15-amp motor and comes equipped with a 12-inch carbide blade that
spins at 3,600 rpm. Accuracy is a critical component for a solid miter saw, and the DW715 delivers.
The DW715 incorporates an adjustable stainless steel miter detent plate with 11 positive stops for
the most common miter cuts. The saw features a miter detent override that allows the user to
override the miter stops and adjust to the miter setting desired without the saw slipping into the
miter detents while the new precise miter system delivers more repeatable and accurate miter
angles. The cam lock miter handle eliminates the need to twist the miter handle to lock in on the
miter angle and delivers a quick and solid miter lock. The innovative machined base fence design
delivers long-term fence straightness by providing additional support to the fence. The DW715
delivers the capacity to cut up to 6-1/2-inch base molding against the fence when mitered to the left
and crosscut capacity up to 2 x 8 dimensional lumber. The DW715 is designed to accept the DW7187
DEWALT Adjustable Miter Saw Laser System (SOLD SEPERATELY, NOT INCLUDED) which delivers
visibility to the cut path. The saw can be beveled to the left 0 to 48 degrees and to the right 0 to 3
degrees with positive stops at 0, 45 and 33.9 degrees for cutting crown molding lying flat. Weighing
in at less than 42 pounds and equipped with comfortable side handles in the base, the DW715 is
designed to be extremely portable. The DW715 includes an extension kit, carbide blade, blade
wrench and dust bag.
Amazon.com
There are plenty of chop saws on the market, but there are a few features that set the DeWalt
DW715 apart from the mitering crowd. First among them, we think, is the great detent override,
because every corner in your workday is not a perfect 90 degrees. With most saws, it’s impossible
to set a miter at 44.5 degrees, because you’ll slide right into the otherwise handy detent. But on this
DeWalt, a simple override lets you lock into the exact – and we mean exact – angle you need to get
the tightest fit. There are 11 miter detent stops, and arriving at them takes just a squeeze on the
cam lever, which we like a whole lot more than the turnscrew knobs on other saws.
Running a close second is the machined base support for the tall sliding fence, which DeWalt
promises will never give you anything but the ultimate accuracy. We like the extra height because it
supports crown molding beautifully, even up to 5-1/4" nested and base molding up to 6-1/2"
vertically. Need a bevel cut? The fence slides neatly out of the way for bevels, anywhere from 0 to
48 degrees on the left and 0 to 3 degrees on the right. (Of course, this is the single-bevel version;
if it’s a double bevel saw you’re after, check out the DW716 and the amazing DW718.) You won’t
hear any complaining from this motor no matter what you’re cutting, as it’s drawing a beefy 15 amps
and an rpm of 3,600, slicing through 2-by oak like it’s paper.
If portability is a factor, there are few saws that rival this one, we think: It’s just 42 pounds despite
its brawny power, and a smart designer incorporated easy-on-the-body handles into the base.
Though it’s well-enough suited to the home workshop, this saw is at home at the jobsite. --Kris
Jensen-Van Heste
FEATURES Dewalt Compound Miter Saw DW715
15 Amp motor, 4,000 rpm delivers extended power and durability
Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and
ensures cutting
Exclusive Precise Miter System and Machined Base Fence Support deliver optimizes cutting
accuracy
Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2"
vertically against the fence while easily sliding out of the way for bevel cuts
Bevels 0°-48° to the left and 0°-3° to the right for increased capacity
0°-50° left and right miter capacity for greater versatility
Lightweight (42 lbs.) with built-in carry handle for easy portability
Cam lock miter handle with miter detent override deliver quick and accurate miter angles
4 Hardened Steel Bevel Stops at 0°, 33.9°, 45° and 48° delivers versatility at most common bevel
angles
Designed for use with the DW7187 DEWALT adjustable miter saw laser system delivers visibility to
the cutting path
INCLUDES Dewalt Compound Miter Saw DW715
carbide blade
extension kit
dust bag
blade wrench
SPECIFICATIONS Dewalt Compound Miter Saw DW715
Amps 15.0 Amps
No Load Speed 4,000 rpm
Blade Diameter 12 "
Arbor Size 5/8" or 1 "
Vertical Capacity: Baseboard Against Fence 6-1/2 "
Vertical Capacity: Crown Molding Vertically Nested 5-1/4 "
Horizontal Capacity: Baseboard Lying Flat 8 "
Horizontal Capacity: Crown Molding Lying Flat 6-1/2 "
45° Bevel Cut Capacity (dimensional lumber) 2x8
90° Cross-Cut Capacity (dimensional lumber) 4x6 "
90° Cross-Cut Capacity (Max Width) 2" x 8"
45° Miter Cut Capacity (Max Height) 4x4 dimensional lumber
45° Miter Cut Capacity (Max Width) 2x6 dimensional lumber
Tool Weight 42 lbs
Shipping Weight 49 lbs
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Power Tools Online | Dewalt Tools | Makita Tools | Milwaukee Tools | Bosch Tools | Delta Porter Cable | Hitachi Tools |
| Purchase Dewalt Tools from one of these Dewalt Authorized Online Retailers Click on Retailer for More Savings Information |
| ||||||||||||||||||||
