| Heavy-Duty 2 Gallon, 150 PSI Max, Trim Compressor - Dewalt D55141 |
This new Dewalt compressor is designed to offer end users increased performance, quiet
operation, and a lightweight, compact design. DEWALT designed the D55141 trim compressor to
handle up to two finish nailers. Finish woodworkers and carpenters can use the D55141 to complete
custom and exterior trim, while other tradesmen will find it useful in a number of non-trim
applications. Performance – For increased performance, the compressor produces 2.0 SCFM at 90
PSI, 150 PSI Max, and provides users with a low noise operation at 79 dBA. The D55141 is also
equipped with an oil-free pump, allowing for maintenance-free operation. This long-life pump
delivers surge performance with quick recovery, and the oil-free design also increases productivity
by eliminating the need for users to check or refill the pump. Additionally, the oil-free pump helps to
keep the jobsite clean, preventing oil from transferring to work surfaces. The compressor was
designed with a 10 amp draw motor to deliver easy start-up and reduced breaker tripping. The
motor is also equipped with a high flow regulator that delivers maximum air pressure, increasing
performance on the jobsite. Ease of Use/Portability - The D55141 weighs only 30 pounds and
features a thin (10.5”), compact design, enabling users to easily transport and store the
compressor. For increased efficiency, DEWALT equipped the D55141 with easy-to-use dual, quick
couplers, allowing multiple nailer operations at the same time. The compressor also features a ball
drain valve for quick and thorough tank draining and a convenient cord wrap for quick, easy
storage. Durability - DEWALT built the D55141 with an innovative roll cage, full-protection frame
design to shield the unit from accidental damage and routine wear and tear. The wrap-around
control panel that covers the frame also provides further protection to key components of the
compressor. This compact and unique design provides maximum durability and longevity.
The DeWalt D55141 is a Heavy-Duty 2 Gallon, 150 PSI Max Trim Compressor. The durable oil free
pump provides extended maintenance-free operation and low 79 dBA allows for quieter operation.
Finish woodworkers and carpenters can use the D55141 to complete custom and exterior trim, while
other tradesmen will find it useful in a number of non-trim applications. For increased performance,
the compressor produces 2.0 SCFM at 90 PSI, 150 PSI Max and provides users with a low noise
operation at 79 dBA. It is also equipped with an oil-free pump, allowing for maintenance-free
operation. The long-life pump delivers surge performance with quick recovery and the oil-free
design also increases productivity by eliminating the need for users to check or refill the pump.
Additionally, the oil-free pump helps to keep the jobsite clean, preventing oil from transferring to
work surfaces. The motor is also equipped with a high flow regulator that delivers maximum air
pressure, increasing performance on the jobsite. For increased efficiency it is equipped with the
easy-to-use dual, quick couplers, allowing multiple nailer operations at the same time. The
compressor also features a ball drain valve for quick and thorough tank draining and a convenient
cord wrap for quick, easy storage. It is built with an innovative roll cage, full-protection frame
design to shield the unit from accidental damage and routine wear and tear. The wrap-around
control panel that covers the frame also provides further protection to key components of the
compressor.
FEATURES Dewalt Compressor D55141
2.0 SCFM delivered @ 90 PSI pump, 2.0 gallon tank and 150 max PSI enables more nails to be fired
and provides quicker recovery
Durable oil free pump provides extended maintenance-free operation
Low 79* dBA allows for quieter operation (*Tested per ISO3744)
Roll cage and control panel provide protection to key compressor components
Low 10 amp draw motor provides easy start-up and reduces breaker tripping
Lightweight (30 lbs), thin (10.5") and compact design is easy to carry and store
Ball valve drain allows for quick and thorough tank draining
Dual quick couplers to easily support 2 nailers
Convenient cord wrap for easy storage
High-flow regulator for increased performance
SPECIFICATIONS Dewalt Compressor D55141
Horsepower 0.6 continuous HP
Drive Belt
Tank Size 2.0 gal
Power Supply 120V, 60Hz, 10 amps., universal motor.
CFM @100 PSI 1.8 CFM
Pump Speed 2,200 rpm
Tool Length 21.25 "
Tool Width 19.0 "
Tool Height 10.5 "
Tool Weight 30 lbs
Shipping Weight 35 lbs
operation, and a lightweight, compact design. DEWALT designed the D55141 trim compressor to
handle up to two finish nailers. Finish woodworkers and carpenters can use the D55141 to complete
custom and exterior trim, while other tradesmen will find it useful in a number of non-trim
applications. Performance – For increased performance, the compressor produces 2.0 SCFM at 90
PSI, 150 PSI Max, and provides users with a low noise operation at 79 dBA. The D55141 is also
equipped with an oil-free pump, allowing for maintenance-free operation. This long-life pump
delivers surge performance with quick recovery, and the oil-free design also increases productivity
by eliminating the need for users to check or refill the pump. Additionally, the oil-free pump helps to
keep the jobsite clean, preventing oil from transferring to work surfaces. The compressor was
designed with a 10 amp draw motor to deliver easy start-up and reduced breaker tripping. The
motor is also equipped with a high flow regulator that delivers maximum air pressure, increasing
performance on the jobsite. Ease of Use/Portability - The D55141 weighs only 30 pounds and
features a thin (10.5”), compact design, enabling users to easily transport and store the
compressor. For increased efficiency, DEWALT equipped the D55141 with easy-to-use dual, quick
couplers, allowing multiple nailer operations at the same time. The compressor also features a ball
drain valve for quick and thorough tank draining and a convenient cord wrap for quick, easy
storage. Durability - DEWALT built the D55141 with an innovative roll cage, full-protection frame
design to shield the unit from accidental damage and routine wear and tear. The wrap-around
control panel that covers the frame also provides further protection to key components of the
compressor. This compact and unique design provides maximum durability and longevity.
The DeWalt D55141 is a Heavy-Duty 2 Gallon, 150 PSI Max Trim Compressor. The durable oil free
pump provides extended maintenance-free operation and low 79 dBA allows for quieter operation.
Finish woodworkers and carpenters can use the D55141 to complete custom and exterior trim, while
other tradesmen will find it useful in a number of non-trim applications. For increased performance,
the compressor produces 2.0 SCFM at 90 PSI, 150 PSI Max and provides users with a low noise
operation at 79 dBA. It is also equipped with an oil-free pump, allowing for maintenance-free
operation. The long-life pump delivers surge performance with quick recovery and the oil-free
design also increases productivity by eliminating the need for users to check or refill the pump.
Additionally, the oil-free pump helps to keep the jobsite clean, preventing oil from transferring to
work surfaces. The motor is also equipped with a high flow regulator that delivers maximum air
pressure, increasing performance on the jobsite. For increased efficiency it is equipped with the
easy-to-use dual, quick couplers, allowing multiple nailer operations at the same time. The
compressor also features a ball drain valve for quick and thorough tank draining and a convenient
cord wrap for quick, easy storage. It is built with an innovative roll cage, full-protection frame
design to shield the unit from accidental damage and routine wear and tear. The wrap-around
control panel that covers the frame also provides further protection to key components of the
compressor.
FEATURES Dewalt Compressor D55141
2.0 SCFM delivered @ 90 PSI pump, 2.0 gallon tank and 150 max PSI enables more nails to be fired
and provides quicker recovery
Durable oil free pump provides extended maintenance-free operation
Low 79* dBA allows for quieter operation (*Tested per ISO3744)
Roll cage and control panel provide protection to key compressor components
Low 10 amp draw motor provides easy start-up and reduces breaker tripping
Lightweight (30 lbs), thin (10.5") and compact design is easy to carry and store
Ball valve drain allows for quick and thorough tank draining
Dual quick couplers to easily support 2 nailers
Convenient cord wrap for easy storage
High-flow regulator for increased performance
SPECIFICATIONS Dewalt Compressor D55141
Horsepower 0.6 continuous HP
Drive Belt
Tank Size 2.0 gal
Power Supply 120V, 60Hz, 10 amps., universal motor.
CFM @100 PSI 1.8 CFM
Pump Speed 2,200 rpm
Tool Length 21.25 "
Tool Width 19.0 "
Tool Height 10.5 "
Tool Weight 30 lbs
Shipping Weight 35 lbs
| Heavy-Duty 2 Gallon, 150 PSI Max, Trim Compressor - Dewalt D55141 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Power Tools Online | Dewalt Tools | Makita Tools | Milwaukee Tools | Bosch Tools | Delta Porter Cable | Hitachi Tools |
| Purchase Dewalt Tools from one of these Dewalt Authorized Online Retailers Click on Retailer for More Savings Information |
| ||||||||||||||||||||
