| Heavy-Duty 3-1/2" (90mm) 31° Clipped Head Framing Nailer / Compressor Combo Kit - Dewalt D55153FC |
You will save over $100 with this combo kit as opposed to if you were to buy the items included
separately. The D55153 1.1-horsepower electric compressor packs all the air you'll need plus
high-quality features into a small, lightweight unit. Delivering 3.8 cubic feet per minute at 100 psi,
this stacked tank unit with U.S. fittings and an overload-protected motor is designed to exceed any
contractor's expectations. The D55153 is oil-lubricated with a cast-iron cylinder to ensure that it is
built for long life. Regulator is included. The compressor includes the initial fill of DeWalt synthetic
air compressor oil. DeWalt's D51823 clipped-head framing nailer weighs less than the competition
and has more power to sink nails into the toughest building materials. Weighing in at just 7.5
pounds, it is constructed using magnesium and titanium to minimize weight while adding durability
to withstand extreme job site abuse. In addition, at 12-3/4 inches tall, the nailer is compact enough
to drive nails in even the tightest openings. DeWalt's unique internal valve design generates plenty
of power with minimum recoil for driving nails into hard materials such as laminated engineered
lumbers. For lighter applications such as sheathing and decking, nail depth is controlled with an
innovative tool-free pushbutton adjustment, eliminating the need for special wrenches or changes
in air pressure to set nail heads flush. Designed with input from professional framers, the D51823
includes other unique features such as a patent-pending quick-release jam-clearing mechanism, a
reversible rafter/belt hook, an impact-resistant cast-titanium exhaust plate, and an injection-molded
rubber grip. The D51823 clipped-head framing nailer holds up to 80 31-degree clipped head nails
ranging from 2 to 3-1/2 inches in length and from 0.113 to 0.131 inches in diameter.
FEATURES Dewalt Compressor Combo D55153FC
4.0 SCFM delivered @ 90 PSI pump enables speedy recovery
Oil lubricated pump improves durability
Cast iron cylinder enhances pump life
High-flow regulator for increased performance
4 gallon twin stack tank design with proven acceptance in the market
Dual soft start valves assist in cold weather start up
Nailer: 7.5 lb. magnesium housing and aluminum magazine result in one of the lightest nailers in the
industry
Nailer: 12-3/4" height allows for toe-nailing in confined areas
Nailer: Unique engine design generates power to bury nails in both standard framing lumber and
engineered lumber with minimal recoil
Nailer: Tool-free adjustable depth allows for quick and easy depth of drive setting
SPECIFICATIONS Dewalt Compressor Combo D55153FC
Horsepower 1.1 Continuous HP
Drive Direct drive
Tank Size 4 gal
Power Supply 120V AC, 15 amps, 60 Hz, 2 pole induction motor
CFM @100 PSI 3.8 CFM
Pump Speed 3,400 rpm
Tool Length 18 "
Tool Width 18.5 "
Tool Height 16.75 "
Tool Weight 56.5 lbs
Shipping Weight 60 lbs
INCLUDES Dewalt Compressor Combo 55153FC
D55153 Electric Twin Stack Compressor
D51823 Framer
1 universal quick coupler
DEWALT Compressor Oil
DEWALT safety glasses
50' x 3/8" (9.52mm) air hose with industrial style plug and quick coupler
separately. The D55153 1.1-horsepower electric compressor packs all the air you'll need plus
high-quality features into a small, lightweight unit. Delivering 3.8 cubic feet per minute at 100 psi,
this stacked tank unit with U.S. fittings and an overload-protected motor is designed to exceed any
contractor's expectations. The D55153 is oil-lubricated with a cast-iron cylinder to ensure that it is
built for long life. Regulator is included. The compressor includes the initial fill of DeWalt synthetic
air compressor oil. DeWalt's D51823 clipped-head framing nailer weighs less than the competition
and has more power to sink nails into the toughest building materials. Weighing in at just 7.5
pounds, it is constructed using magnesium and titanium to minimize weight while adding durability
to withstand extreme job site abuse. In addition, at 12-3/4 inches tall, the nailer is compact enough
to drive nails in even the tightest openings. DeWalt's unique internal valve design generates plenty
of power with minimum recoil for driving nails into hard materials such as laminated engineered
lumbers. For lighter applications such as sheathing and decking, nail depth is controlled with an
innovative tool-free pushbutton adjustment, eliminating the need for special wrenches or changes
in air pressure to set nail heads flush. Designed with input from professional framers, the D51823
includes other unique features such as a patent-pending quick-release jam-clearing mechanism, a
reversible rafter/belt hook, an impact-resistant cast-titanium exhaust plate, and an injection-molded
rubber grip. The D51823 clipped-head framing nailer holds up to 80 31-degree clipped head nails
ranging from 2 to 3-1/2 inches in length and from 0.113 to 0.131 inches in diameter.
FEATURES Dewalt Compressor Combo D55153FC
4.0 SCFM delivered @ 90 PSI pump enables speedy recovery
Oil lubricated pump improves durability
Cast iron cylinder enhances pump life
High-flow regulator for increased performance
4 gallon twin stack tank design with proven acceptance in the market
Dual soft start valves assist in cold weather start up
Nailer: 7.5 lb. magnesium housing and aluminum magazine result in one of the lightest nailers in the
industry
Nailer: 12-3/4" height allows for toe-nailing in confined areas
Nailer: Unique engine design generates power to bury nails in both standard framing lumber and
engineered lumber with minimal recoil
Nailer: Tool-free adjustable depth allows for quick and easy depth of drive setting
SPECIFICATIONS Dewalt Compressor Combo D55153FC
Horsepower 1.1 Continuous HP
Drive Direct drive
Tank Size 4 gal
Power Supply 120V AC, 15 amps, 60 Hz, 2 pole induction motor
CFM @100 PSI 3.8 CFM
Pump Speed 3,400 rpm
Tool Length 18 "
Tool Width 18.5 "
Tool Height 16.75 "
Tool Weight 56.5 lbs
Shipping Weight 60 lbs
INCLUDES Dewalt Compressor Combo 55153FC
D55153 Electric Twin Stack Compressor
D51823 Framer
1 universal quick coupler
DEWALT Compressor Oil
DEWALT safety glasses
50' x 3/8" (9.52mm) air hose with industrial style plug and quick coupler
 |
 |
 |
 |
 |
 |
| Power Tools Online | Dewalt Tools | Makita Tools | Milwaukee Tools | Bosch Tools | Delta Porter Cable | Hitachi Tools |
| Purchase Dewalt Tools from one of these Dewalt Authorized Online Retailers Click on Retailer for More Savings Information |
| ||||||||||||||||||||
